Events

Robust Design using SaberRD

Overview

This Robust Design workshop teaches a practical methodology for implementing a robust design flow using simulation. The class concentrates on methodology and walks you through the steps that lead to quality, cost-effective design.

During this workshop, you will learn and apply the following skills: 
• Determine the design performance measure that is the focus of robust design techniques
• Implement a model in a manner that balances the trade-off between fidelity, ease-of implementation, and simulation speed
• Simulate to determine the nominal system response
• Isolate the design parameters that have the biggest influence on design robustness
• Optimize the design to meet robustness goals

Hands-on labs follow each training module, so you can apply the skills learned in the lecture session.

Public And Technical Background Required

The training is recommended to everybody interested in the theoretical aspects and practical design issues of power electronics simulation. Having previous experience in power electronics and circuit simulation is really useful, but beginners with no background in those topics will also benefit from the training.

Prerequisites

Basic understanding of engineering design principles.

Objectives

At the end of this workshop you should be able to:
– Apply the steps of the robust design methodology that leverages a virtual prototype
– Use the Saber Simulator to apply the steps of this methodology

Program

  • Unit 0: Primer: Robust Design, Saber
  • Unit 1: Prepare for Simulation
  • Unit 2: Verify Norminal Operation
  • Unit 3: Find Sources of Variance
  • Unit 4: Analyze Statistical Performance
  • Unit 5: Modify Design / Prove Robustness
  • Unit 6: Worst-Case Analysis
  • Unit 7: Fault Analysis

The workshop starts at 8:00 AM and ends at 5:00 PM.

Coffee breaks and breakfast lunch will be offered by PWSIM

Computer and temporary Saber Licenses

Saber temporary licenses and computers will be provided for the duration of the workshop.

Venue

PWSIM
Level 6, Chennai Citicentre,
Dr. Radhakrishnan Salai,
Chennai – 600004
INDIA

Contact

Mr. Sampath KUMAR, Sales Manager

Email: s.kumar@pwsim.com

 

General conditions for workshop

Please register as early as possible if you plan to attend the workshop. As soon as the minimum of participants is reached, PWSIM will confirm the workshop.

Cancellation can be made according to PWSIM’ General Conditions: In case you cannot attend the workshop after having registered, please contact us as soon as possible at marketing@powersys.fr Please note that PWSIM will not reimburse any travel and/or accommodation expenditure in case of cancellation of the workshop. We recommend you to make your travel arrangements once the workshop is confirmed.

For French participants: POWERSYS est enregistré en tant que prestataire de formation (auprès du Préfet de la Région Provence-Alpes-Côte d’Azur sous le numéro 93 13 13256 13). Une convention de formation peut être établie sur demande avant la date de formation.

Contact for any additional information: Please feel free to contact us for any further information marketing@powersys.fr